| Part Number |
ATV320U06N4B |
| Manufacturer |
Schneider |
| Product Type |
Variable Speed Drive |
| Application |
Designed for complex machines |
| Drive Format |
Book |
| Product Destination |
Asynchronous motors, Synchronous motors |
| EMC Filter |
Class C2 EMC filter integrated |
| IP Degree of Protection |
IP20 conforming to EN/IEC 61800-5-1 |
| Type of Cooling |
Fan |
| Phase |
3 phases |
| Rated Supply Voltage |
380...500 V ( - 15...10 %) |
| Supply Frequency |
50...60 Hz ( - 5...5 %) |
| Motor Power kW |
0.55 kW heavy duty |
| Line Current |
2.8 A at 380 V heavy duty, 2.2 A at 500 V heavy duty |
| Prospective Line Isc |
5 kA |
| Apparent Power |
1.9 kVA at 500 V heavy duty |
| Continuous Output Current |
1.9 A at 4 kHz heavy duty |
| Maximum Transient Current |
2.9 A during 60 s heavy duty |
| Control Profile |
Voltage/frequency ratio, 2 points, Voltage/frequency ratio, 5 points, Flux vector control without sensor, standard, Voltage/frequency ratio - Energy Saving, quadratic U/f, Flux vector control without sensor - Energy Saving, Vector control without sensor |
| Output Frequency |
0.1...599 Hz |
| Nominal Switching Frequency |
4 kHz |
| Switching Frequency |
2...16 kHz adjustable, 4...16 kHz with current derating |
| Safety Function |
STO (safe torque off) SIL 3, SS1 (safe stop 1), SMS (safe maximum speed), SLS (safe limited speed), GDL (guard door locking) |
| Communication Port Protocol |
CANopen, Modbus |
| Option Card |
Communication module: CANopen daisy chain RJ45, Communication module: CANopen SUB-D 9, Communication module: CANopen open style terminal block, Communication module: EtherCAT RJ45, Communication module: DeviceNet, Communication module: Ethernet/IP, Communication module: Profibus DP V1, Communication module: Profinet, Communication module: Ethernet Powerlink |
| Variant |
Standard version |
| Output Voltage |
<= power supply voltage |
| Permissible Temporary Current Boost |
1.5 x In during 60 s heavy duty |
| Speed Range |
1...100 with asynchronous motor in open-loop mode |
| Speed Accuracy |
+/- 10 % of nominal slip 0.2 Tn to Tn |
| Torque Accuracy |
+/- 15 % |
| Transient Overtorque |
170...200 % of nominal motor torque |
| Braking Torque |
< 170 % with braking resistor during 60 s |
| Regulation Loop |
Adjustable PID regulator |
| Motor Slip Compensation |
Automatic whatever the load, Not available in voltage/frequency ratio (2 or 5 points), Adjustable 0...300 % |
| Acceleration and Deceleration Ramps |
SUCUS, Deceleration ramp automatic stop DC injection, Deceleration ramp adaptation, Linear, Ramp switching |
| Braking to Standstill |
By DC injection |
| Protection Type |
Drive: thermal protection, Drive: short-circuit between motor phases, Drive: overheating protection, Drive: overcurrent between output phases and earth, Drive: input phase breaks |
| Frequency Resolution |
Analog input: 0.012/50 Hz, Display unit: 0.1 Hz |
| Electrical Connection |
Power supply, screw terminal: 1.5...4 mm² AWG 14...AWG 10, Motor/Braking resistor, screw terminal: 1.5...2.5 mm² AWG 14...AWG 12, Control, screw terminal: 0.5...1.5 mm² AWG 18...AWG 14 |
| Type of Connector |
1 RJ45 for Modbus/CANopen on front face |
| Physical Interface |
2-wire RS 485 for Modbus |
| Transmission Frame |
RTU for Modbus |
| Transmission Rate |
50 kbps, 125 kbps, 250 kbps, 500 kbps, 1 Mbps for CANopen, 4.8, 9.6, 19.2, 38.4 kbit/s for Modbus |
| Data Format |
8 bits, configurable odd, even or no parity for Modbus |
| Type of Polarization |
No impedance for Modbus |
| Number of Addresses |
1...247 for Modbus, 1...127 for CANopen |
| Method of Access |
Slave for CANopen |
| Supply |
Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC (+/- 5 %) current <= 10 mA (overload and short-circuit protection) |
| Local Signalling |
1 LED red for drive voltage, 1 LED red for drive fault, 1 LED red for CANopen error, 1 LED green for CANopen run |
| Width |
45 mm |
| Height |
325 mm |
| Depth |
245 mm |
| Product Weight |
2.5 kg |
| Analogue Input Number |
3 |